Delivery of streptomycin to the rat colon by use of electrospun nanofibers

Scientific Reports volume 12, Article number: 21503 (2022) Cite this article

817 Accesses

1 Altmetric

Metrics details

Drug-loaded electrospun nanofibers are potential drug carrier systems that may optimize disease treatment while reducing the impact on commensal microbes. The feasibility of streptomycin-loaded pullulan nanofibers fabricated from a green electrospinning procedure using water as the solvent was assessed. We conducted a rat study including a group treated with streptomycin-loaded nanofibers (STR-F, n = 5), a group treated with similar concentrations of streptomycin in the drinking water (STR-W, n = 5), and a non-treated control group (CTR, n = 5). Streptomycin was successfully loaded into nanofibers and delivered by this vehicle, which minimized the quantity of the drug released in the ileal compartment of the gut. Ingested streptomycin-resistant E. coli colonized of up to 106 CFU/g feces, revealing a selective effect of streptomycin even when given in the low amounts allowed by the nanofiber-based delivery. 16S amplicon sequencing of the indigenous microbiota revealed differential effects in the three groups. An increase of Peptostreptococcaceae in the cecum of STR-F animals may indicate that the fermentation of nanofibers directly or indirectly promoted growth of bacteria within this family. Our results elucidate relevant properties of electrospun nanofibers as a novel vehicle for delivery of antimicrobials to the large intestine.

Antibiotics are crucial to control and prevent infections, but may also disturb non-target bacteria in the gut lumen1,2,3. Negative effects of antimicrobial therapies include disruption of the commensal intestinal microbiota as well as development of drug-resistant bacteria3,4.

Developments within biomaterials technologies have provided advanced drug carriers, such as nanofibers, which might help overcome challenges with therapeutic drug efficacy, reduce the risk of developing antimicrobial resistance5,6, and potentially minimize the impact on the gut microbiota.

Interestingly, drug delivery by nanostructured carriers has demonstrated relevant features such as efficient inhibition of bacterial growth and sustained release7. Moreover, drug-delivery systems based on polysaccharides, particularly pullulan, are attracting more attention since they are non-toxic, stable, biocompatible, and biodegradable8,9,10,11. Electrospinning, which is a simple and fast nanofiber-forming system, is moving forward in creating new kinds of nanostructures including multilayer sheets12,13, nano-hybrids14,15, and core–shell nanofibers14,16. Different potential electrospinning strategies for manipulating drug release behaviors for an improved therapeutic effect have recently been reviewed17,18. Against the broad use of electrospun nanofibers for drug delivery applications, several introduced electrospun nanofiber-based systems involve organic solvents in the fabrication procedure6. Here, we used a green process, including pullulan as a food-grade biopolymer and water as the solvent. Pullulan is a linear polysaccharide produced from the fungus Aureobasidium pullulans and consists of maltotriose type units i.e. α-(1 → 6)-linked with (1 → 4)-α-d-triglucosides19. This unique linkage pattern leads to high adhesion and tensile strength of pullulan20. Unlike many other polysaccharides, pullulan dissolves easily in water due to the low degree of hydrogen bonding. It provides good processing potential for forming films and fibers, and due to the non-hygroscopic nature shows a considerable inter-molecular mechanical strength8,19,21,22. Furthermore, this biopolymer is an appropriate carrier for drug delivery applications due to its non-mutagenic, non-carcinogenic, biodegradable, mucoadhesive, and cytoadhesive properties6,9,13.

Since antimicrobial resistance is one of the biggest global threats to public health, and we are currently on the verge of a post-antibiotic era23, site-specific antimicrobial delivery is preferred. Approaches that increase the local concentration of antibiotics only in the sites where they are intended to have an effect, might be a way to reduce the development of drug resistance. Therefore, this study aimed to describe the impact of ingested streptomycin-loaded pullulan nanofibers on the intestinal bacterial community in rats compared with streptomycin delivery through drinking water. Additionally, the selective effect on an ingested resistant bacterial strain was assessed.

Disk-diffusion assays, performed by the Kirby-Bauer method, confirmed that the streptomycin antimicrobial activity remained after loading into electrospun fibers. Thus, streptomycin-loaded nanofibers inhibited the growth of sensitive E. coli and S. aureus strains (Fig. 1). Overall, we conclude that encapsulation of the drug did not affect the antimicrobial properties of the drug. Thus, electrospun nanofibers were suitable for maintaining the optimum therapeutic level of the antimicrobial drug in vitro. A similar study performed with amoxicillin has demonstrated that the nanofiber antimicrobial embedment does not compromise the release and activity of the drug24. Therefore, electrospun nanofibers may be relevant in various applications in the field of drug delivery.

Disk diffusion assay. (a) S. aureus disk diffusion results of pullulan loaded with streptomycin and (b) E. coli disk diffusion results of pullulan loaded with streptomycin.

A rat study was performed to investigate the effects of streptomycin-carrying nanofibers on the degree of colonization of streptomycin-resistant E. coli MG1655-K12. Before the inoculation, no background resistance to streptomycin or gentamycin was detected in the fecal samples from these animals (data not shown). On Day 1 and Day 2 after inoculation, significantly more streptomycin-resistant E. coli were found in fecal samples from rats that received streptomycin either encapsulated into the nanofibers (STR-F) or in drinking water (STR-W) than in the control (CTR) group (Fig. 2a). No difference was observed between STR-F and STR-W (Fig. 2a). Higher numbers of resistant E. coli were found in cecal samples of the STR-W animals, while the difference between the STR-F group and the CTR was not significant (Fig. 2b,c). No difference in resistant E. coli numbers between any of the groups was observed in colonic and fecal samples obtained on Day 3, likely because the streptomycin treatment ceased on Day 2 in both STR-W and STR-F.

CFU counts. (a) E. coli CFU counts per gram of fecal material at Day 1, Day 2, and Day 3; (b) E. coli CFU counts per gram of cecum content at Day 1, Day 2, and Day 3; (c) E. coli CFU counts per gram of colon content at Day 1, Day 2, and Day 3. *(P < 0.05); **(P < 0.01); *** (P < 0.001). Only four samples were obtained from CTR on Day 1.

Streptomycin, given as 5 g/L in drinking water, has for decades been used in animal models to suppress facultative anaerobic bacteria, and thereby allow ingested streptomycin-resistant proteobacteria species to overcome the colonization barrier25,26,27. In the current experiment, we have applied a much lower concentration (0.25 g/L) in drinking water of the STR-W rats in an attempt to match the absolute amount of 7 mg of streptomycin given as nanofibers to the STR-F rats. Nevertheless, our results demonstrate that it is possible to obtain intestinal proliferation of resistant bacteria at this 20-fold lower concentration than the currently applied standard.

Measurement of actual water consumption during the experiment revealed that the total streptomycin consumed by STR-W rats was around 12.5 mg, considering an estimated 50% spillage. As mentioned above, streptomycin dosed by nanofibers to STR-F rats during the experiment was approximately 7 mg.

The concentration of streptomycin released in the gut from nanofibers was assessed by ELISA of rat intestinal content obtained on Day 3. Interestingly, we observed a significantly (P < 0.005) lower concentration of streptomycin in the ileal samples from the STR-F group, as compared to the STR-W group (Fig. 3). We speculate that the coated gelatin capsules start dissolving in the small intestine and release the electrospun pullulan fibers, which have mucoadhesive properties9. The pullulan nanofibers then dissolve and form a jelly-like, mucoadhesive construct, retaining the drug partially through the ileum and moving into the large intestine, where more drug get gradually released.

Streptomycin concentrations. Heatmap reflecting approximate levels of streptomycin present in ileum, cecum and colon STR-W and STR-F levels are different in ileal samples (P < 0.005), while levels in cecum and colon do not differ between the two groups. The assay was saturated above 50 ng/mL. Figure was made in GraphPas Prism as described in the methods section.

In line with our observations, core–shell fibers, which are produced by coaxial electrospinning, have previously shown successful sustained release of hydrophilic drugs such as streptomycin28. Regarding drug delivery applications using pullulan nanofibers, there are several studies focusing on fast dissolving properties of pullulan and recommending it for fast delivery approaches via the buccal route8,19,29,30 or for wound dressing applications6,31. Our findings suggest that antibiotic-loaded pullulan nanofibers are also suitable for delivery to the large intestine, due to the mucoadhesive properties of the dissolved pullulan.

Sequencing of 16S rRNA gene amplicons was performed to assess the effect of streptomycin treatment on the intestinal microbiota. Microbial richness was significantly reduced in fecal samples from STR-F (P = 0.008), and STR-W (P = 0.007) groups, compared with the CTR group (Fig. 4). In the cecum, a slightly higher richness was observed in the CTR group than in STR-F samples.

Microbial richness in cecum, colon, and feces. Samples are indicated by dots, while horisontal bars mark the averages. P-values were from the permutational test of the mean and shown as: *(P < 0.05); **(P < 0.01); ***(P < 0.001).

Beta-diversity was compared between groups based on the Bray–Curtis dissimilarity and visualized with non-metric multidimensional scaling (NMDS). Three distinct clusters represented STR-W, STR-F and CTR samples, respectively (Fig. 5a). Overall, the treatment was more influential than the location in the gut, based on the PERMANOVA model (0.27 [R2 for Group] vs. 0.09 [R2 for location], P = 0, permutation test with 100 iterations). The pairwise comparison of all groups at each location was significant in all cases, except for fecal samples from the two STR-treated groups (Fig. 5b).

Microbial compositions in cecum, colon, and feces. (a) The overall microbial compositions of samples at the ASV level were assessed with and Bray–Curtis distance and visualized with non-metric multi-dimensional scaling (NMDS). (b) A table to show the comparison of beta diversity between groups at a location and the P-values are derived from the PERMANOVA models using Bray–Curtis distance. (c) Bar plots showing the taxonomic composition of top 10 most abundant Phylum.

Together, Bacteroidetes and Firmicutes constituted more than 99% of the ASVs identified in rat samples. We found a significant reduction of the relative abundance of Firmicutes and a corresponding relative increase of Bacteroidetes in STR-W and STR-F groups in samples from cecum, colon and feces (Fig. 5c).

At family level, lower levels of Lactobacillaceae were found in the cecum of STR-F animals as compared to both STR-W and CTR (Fig. 6), while a higher abundance of Peptostreptococcaceae, specifically Romboutsia, was seen (Fig. 6). Peptostreptococcaceae are commensals in healthy rats32, and Romboutsia, which belongs to the Peptostreptococcaceae family, consists of anaerobe microorganisms adapted to utilize a wide range of carbohydrates, and relies on exogenous amino acids and peptides for protein synthesis33. We speculate that the observed higher levels of this species in the STR-F group than in the STR-W group results from the fermentation of nanofibers in the colon, which directly or indirectly promotes the growth of bacteria within this family. The indigestible portions of the nanofibers were composed of maltotriose units connected by α-1,6 bonds, which are resistant to mammalian intestinal enzymes but are available for bacterial fermentation in the large bowel34.

Tree plot showing the comparison of relative taxon abundances between groups. The largest node in the center is the kingdom bacteria. Along the tree branch outward, the next node is the phylum level, then followed by Class, Order, Family, and Genus. The size of the node is proportional to the mean relative abundance in the corresponding phylogenetic level. A node is labelled and colored when it has significantly different relative abundances (permutation test) between groups. Figure was made in R as described in the "Methods" section.

Streptomycin can be incorporated into electrospun nanofibers without losing the antibacterial activity, and furthermore it can successfully be retained through the small intestine and delivered to the large intestine of rats by dosing with encapsulated nanofibers. Our results suggest that electrospun nanofibers represent an advanced alternative for the delivery of antimicrobials to the large intestine. This approach is likely to allow for reduction in the amount of antibiotics needed to be effective, and thereby to reduce the risk of development of resistance, and cause less disturbance of the indigenous microbiota. Indeed, delivery by nanofibres was seen to affect the microbiota in a different way than delivery through drinking water.

Pullulan was kindly provided by HAYASHIBARA CO., LTD (Japan). Water was purified using a Milli-QPlus 185 water purification system (Millipore, Bedford, MA) with resistivity higher than 18 MΩ·cm. Streptomycin standard disks (25 µg per disk) were purchased from Oxoid, Denmark. Hexamethyldisilazane (HMDS) was obtained from Merck (Germany). Streptomycin, Gentamycin, Trehalose, and RSM (skim milk powder) were purchased from Sigma-Aldrich, Denmark.

Streptomycin was loaded into pullulan electrospun nanofibers with final concentrations of 1 and 10% respectively (w/w; weight of streptomycin to the weight of polymer). For encapsulation of streptomycin in Pullulan, streptomycin powder was first dissolved in water, and then pullulan powder was added to the solution to achieve the desired concentration. For making 1% or 10% streptomycin to Pullulan constructs (w/w), first, a streptomycin solution of 0.2% or 2% (w/v) in water was made under slight stirring at 25 ℃ for 4 h. Then pullulan powder was added to make a 20% solution (w/v) of Pullulan in water and was stirred overnight at room temperature. For instance, for fabrication of a 1% (w/w) streptomycin: pullulan nanofiber sheet, streptomycin was dissolved in water (conc. 2 mg/mL) under slight stirring at 25 ℃ for 4 h. Then pullulan powder (0.2 g) was added to the 1 mL solution to make the desired final concentration of 20% pullulan in water for optimal electrospinning. Finally, the solution was sterile-filtered through a 25 mm filter (Sigma Aldrich) and used for electrospinning.

For electrospinning, a customized conventional electrospinning system including a high voltage source (Glassman, FJ50P2.4-F22), a syringe pump (Aladdin, AL-1000) connected to a syringe with a 21 G hypodermic needle, and a static collector was used. The optimized spinning parameters were set to a feeding rate of 1 mL/h, a voltage of 14–16 kV, a needle tip-to-collector distance of 15 cm, a humidity of 35%, and a temperature of 25 °C. The electrospinning chamber including the pump and the collector was disinfected by EtOH 70% before starting each electrospinning procedure.

To investigate whether the antimicrobial activity efficacy of streptomycin remains after the electrospinning, we performed a disk-diffusion assay by the Kirby–Bauer method35. The antibacterial activity of the streptomycin loaded into nanofiber sheets was analyzed against Gram-negative (Escherichia coli (E. coli) MG1655 subst. K12 (ATCC 47076)) and Gram-positive (Staphylococcus aureus (S. aureus) (ATCC 2928)) streptomycin sensitive bacteria. The E. coli and S. aureus strains were grown overnight in Luria Bertani plates (LB) at 37 °C. An inoculum for each sample was prepared and the turbidity of the suspension was adjusted in a densitometer (Sensititre–Nephelometer, Thermo Fisher, Denmark) in comparison with the 0.5 McFarland standard. Then, a hundred microliters of the inoculum were spread on Mueller–Hinton agar plates. The electrospun sheets containing 10 µg and 100 µg (from 1 and 10% w/w streptomycin:pullulan nanofibers) were cut with a biopsy punch of 6 mm, then placed alongside the standard Streptomycin disks of the same diameter (25 µg) (Oxoid, Denmark) as a control. Non-streptomycin-loaded electrospun sheets (pullulan nanofibers) were included as negative controls. Samples were incubated at 35 °C for 16–18 h. The diameter of the inhibition zone was measured and compared with breaking point values provided by the EUCAST guidelines (https://www.eucast.org/fileadmin/src/media/PDFs/EUCAST_files/Breakpoint_tables/v_11.0_Breakpoint_Tables.pdf).

To dose rats with antibiotic-loaded nanofibers, the electrospun sheets of 10% streptomycin:pullulan were cut manually to make square particles of around 1 mm in length. Then, hard-shelled gelatine capsules (Torpac size 9) were coated in a 12% (w/v) solution of Eudragit L100 in IPA where dibutyl sebacate was added as a plasticizer in a 5% w/w ratio relative to Eudragit. Finally, capsules were filled with 12 mg of particles (equivalent to 1.2 mg streptomycin per capsule) before dosing to the rats.

To find out whether the nanofiber electrospun sheet loaded with streptomycin affected the establishment of streptomycin-resistant bacteria in the intestine, we performed a rat study involving oral inoculation of the animals with the streptomycin-resistant mCherry-labelled E. coli MG1655 subst. K12, Taxon Identifier 511145 (https://www.uniprot.org/uniprot/A0A4D6FVK6) in association with streptomycin delivered either as encapsulated nanofibers, in the drinking water or without streptomycin as control (Fig. 7). The fluorescence-labeled strain was chosen to allow easy verification by microscopy.

Study outline. Schematic representation of the in vivo study, representing CTR (control), which received a placebo hard-shelled gelatine capsule, STR-F (streptomycin-loaded nanofibers), which received a capsule coated with Eudragit 100S and loaded with antibiotic-loaded pullulan particles two times per day, and STR-W (streptomycin in the drinking water) received a placebo hard-shelled gelatine capsule and Streptomycin in the drinking water (0.25 g/L). All groups received a single dose of 108 CFU of streptomycin-resistant Escherichia coli. Figure was created in BioRender by the authors.

Fifteen male 8-weeks-old Sprague–Dawley rats (Charles River) were allocated to three groups of five and housed individually in scantainers (Scanbur). After an acclimatization period of seven days, the animals were treated with streptomycin either in drinking water (STR-W), inside of particles of electrospun nanofibers (STR-F), or did not receive any antimicrobial drug (CTR). The CTR rats received a placebo hard-shelled gelatine capsule, STR-F rats received a hard-shelled gelatine capsule filled with antibiotic-loaded pullulan particles as described above twice a day for 3 days (Day 0, 1 and 2), while the STR-W rats received an empty placebo hard-shelled gelatine capsule and Streptomycin in the drinking water (0.25 g/L) for the same three days (Fig. 7). We aimed at a concentration in drinking water, which would make the total consumption of streptomycin by the STR-W rats match the approximately 7 mg given to the STR-F rats considering that the average water consumption was between ca. 30–50 mL of water/animal/day. For this study, the streptomycin- and gentamycin-resistant E. coli were incubated on LB agar (SSI Diagnostica A/S) for 16 h, as described earlier. A colony was transferred to LB broth supplemented with 20 µg/mL gentamycin and 100 µg/mL streptomycin overnight/16 h at 37 °C while shaking. The culture was centrifuged at 5000×g for 10 min, washed and resuspended in sterile phosphate-buffered saline (PBS) to a cell density of 109 CFU/mL. Twenty-four hours after the onset of streptomycin treatment, all groups received a single dose of approximately 108 CFU of the strain. Animals were fed and received water ad libitum throughout the whole experiment.

Fecal samples (approximately 1 g) were collected before inoculation and 24 h, 48 h, and 72 h after inoculation. After 72 h, animals were euthanized by CO2 asphyxiation followed by decapitation. Rats were dissected and luminal contents were aseptically collected from the distal ileum, cecum, and colon regions. The contents from these sections were weighed and homogenized. Tenfold dilutions were spread on LB agar plates supplemented with streptomycin (100 µg/mL) or gentamycin (25 µg/mL) (Sigma-Aldrich, Denmark), as appropriate. CFU counts were assessed after 24–72 h incubation at 37 °C under anaerobic conditions. Random colonies were analysed by mass spectrometry using Bruker Reflex™ III MALDI-TOF (Bruker‐Daltonik, Germany) to ensure that the isolates corresponded to E. coli K-12 MG1655.

To estimate the quantity of drug released in the intestinal lumen, an ELISA assay was performed to verify the concentration of streptomycin present in fecal content. Fecal pellets from the ileum, cecum, and colon were analyzed. Samples were homogenized and diluted, and the procedure was performed according to the SM Streptomycin ELISA kit (Elabscience, USA) (Catalog # E-FS-E031) manufacturer instructions. The optical density (OD) was measured using a microplate reader Biotek EL800 (Agilent, DK), set at 450 nm and 630 nm. Data were processed using GraphPad Prism Software 8.1.1.

DNA extraction, library preparation, and subsequent sequencing on the Ion Torrent platform were performed as previously described36. Briefly, samples consisted of fecal samples at 72 h (n = 15), samples from ileum (n = 15) and samples from colon (n = 15). Microbial DNA was extracted using ~ 0.2 g of materials with the DNeasy® PowerLyzer® PowerSoil® isolation kit from Qiagen. The extracted DNA was stored at − 20 °C before use.

Amplification of the V3-region of the 16S rRNA gene was performed as follows: PCR mastermix consisted of 0.2 µL Phusion High-Fidelity DNA polymerase (ThermoFisher Scientific F-553L), 4 µL HF buffer, 0.4 µL dNTP (10 mM of each base), 1 µM forward primer (PBU; 5ʹA-adapter-TCAG-barcode-CCTACGGGAGGCAGCAG-3ʹ) and 1 µM reverse primer (PBR; 5ʹ-trP1-adapter-ATTACCGCGGCTGCTGG-3ʹ) and 5 ng community fecal DNA in 20 µL total reaction volume. Both primers (TAG Copenhagen A/S) were linked to sequencing adaptors and the forward primer additionally contained a unique 10 bp barcode (Ion Xpress™ Barcode Adapters) for each sample. The PCR program consisted of initial denaturation for 30 s at 98 °C, followed by 24 cycles of 98 °C for 15 s and 72 °C for 30 s, and lastly, 72 °C for 5 min to allow final extension before cooling to 4 °C. No-template controls were included for each PCR run, all resulting in less than 0.05 ng/µL. The PCR products were purified using HighPrepTM PCR Magnetic Beads (MAGBIO®, AC-60005) with a 96-well magnet stand (MAGBIO®, MyMag 96), according to the manufacturer recommendation. DNA quantity was measured using Qubit® dsDNA HS assay (InvitrogenTM, Q32851) and sequenced on chip using the Ion OneTouchTM and Ion PGM systems with a 318-Chip v2 incorporating the Hi-Q chemistry in 200 bp runs.

Raw sequences were demultiplexed with barcodes and primers removed using QIIME237. The obtained sequences were further filtered to range from 125 to 180 bp. These pre-processed reads were analyzed with the DADA2 pipeline in R38, using the parameters recommended for Ion Torrent. The obtained amplicon sequence variants (ASVs) were thereafter taxonomically annotated using the Ribosomal Database Project (RDP) database (release 11.5).

Statistical analysis was performed with QIIME2, R, and GraphPad Prism Software 8.1.1. Samples were rarefied to an even depth of reads before calculating richness. CFU counts, streptomycin concentration, microbial richness, and taxa abundances were compared with a two-sided permutational test. ASVs (Amplicon sequencing variant) with less than 0.01% relative abundances were removed before further analysis. Beta diversity was assessed based on the Bray–Curtis distance matrix and compared with the permutational multivariate analysis of variance (PERMANOVA). The taxonomic composition shown with trees was generated with R-package "metacoder"39. The significance level was set at 0.5. Comparison of ELISA-assessed streptomycin levels in ceca of STR-F and STR-W animals was done by t-test assuming equal variances.

Danish Animal Experiments Inspectorate approved the animal trial under license number 2020-15-0201-00484. The experiment protocol was pre-registered by DTU's BioFacility. Animals were monitored daily during the experiment, and the experiment was carried out in accordance with Danish national guidelines and overseen by the Institute's Animal Welfare Committee for animal care and use. Methods are reported in accordance with ARRIVE guidelines.

Sequence data have been deposited at NCBI Sequence Read Archive under the number PRJNA758361.

Nitzan, O., Elias, M., Peretz, A. & Saliba, W. Role of antibiotics for treatment of inflammatory bowel disease. World Journal of Gastroenterology. 22, 1078–1087 (2016).

Article CAS Google Scholar

Francino, M. P. Antibiotics and the human gut microbiome: Dysbioses and accumulation of resistances. Front. Microbiol. 6, 1–11 (2016).

Article Google Scholar

Shah, T., Baloch, Z., Shah, Z., Cui, X. & Xia, X. The intestinal microbiota: Impacts of antibiotics therapy, colonization resistance, and diseases. Int. J. Mol. Sci. 22, 6597 (2021).

Article CAS Google Scholar

Fair, R. J. & Tor, Y. Antibiotics and bacterial resistance in the 21st century. Perspect. Med. Chem. 6, 25–64. https://doi.org/10.4137/PMC.S14459.Received (2014).

Article Google Scholar

Patra, J. K. et al. Nano based drug delivery systems: Recent developments and future prospects 10 Technology 1007 Nanotechnology 03 Chemical Sciences 0306 Physical Chemistry (incl. Structural) 03 Chemical Sciences 0303 Macromolecular and Materials Chemistry 11 Medical and He. J. Nanobiotechnol. 16, 1–33 (2018).

Google Scholar

Ajalloueian, F. et al. Amoxicillin-loaded multilayer pullulan-based nanofibers maintain long-term antibacterial properties with tunable release profile for topical skin delivery applications. Int. J. Biol. Macromol. 215, 413–423 (2022).

Article CAS Google Scholar

Mamun, M. M., Sorinolu, A. J., Munir, M. & Vejerano, E. P. Nanoantibiotics: Functions and properties at the nanoscale to combat antibiotic resistance. Front. Chem. 9, 1–23 (2021).

Article Google Scholar

Hsiung, E. et al. Antibacterial nanofibers of pullulan/tetracycline-cyclodextrin inclusion complexes for fast-disintegrating oral drug delivery. J. Colloid Interface Sci. 610, 321–333 (2022).

Article ADS CAS Google Scholar

Bulman, S. E. et al. Pullulan: A new cytoadhesive for cell-mediated cartilage repair. Stem Cell Res. Ther. 6, 34 (2015).

Article Google Scholar

Hong, L. et al. Pullulan nanoparticles as prebiotics enhance the antibacterial properties of Lactobacillus plantarum through the induction of mild stress in probiotics. Front. Microbiol. 10, 1–12 (2019).

Article Google Scholar

Mir, M., Ahmed, N. & UrRehman, A. Recent applications of PLGA based nanostructures in drug delivery. Colloids Surf. B Biointerfaces 159, 217–231 (2017).

Article CAS Google Scholar

Jeckson, T. A., Neo, Y. P., Sisinthy, S. P. & Gorain, B. Delivery of therapeutics from layer-by-layer electrospun nanofiber matrix for wound healing: An update. J. Pharm. Sci. 110, 635–653 (2021).

Article CAS Google Scholar

Ajalloueian, F. et al. Multi-layer PLGA-pullulan-PLGA electrospun nanofibers for probiotic delivery. Food Hydrocoll. 123, 107112 (2022).

Article CAS Google Scholar

Liu, X. et al. Electrospun core (HPMC–acetaminophen)–Shell (PVP–sucralose) nanohybrids for rapid drug delivery. Gels 8, 357 (2022).

Article CAS Google Scholar

Liu, H. et al. Hybrid films prepared from a combination of electrospinning and casting for offering a dual-phase drug release. Polymer 14, 2132 (2022).

Article CAS Google Scholar

Zhao, K. et al. Modified tri-axial electrospun functional core–shell nanofibrous membranes for natural photodegradation of antibiotics. Chem. Eng. J. 425, 131455 (2021).

Article CAS Google Scholar

Ji, Y., Song, W., Xu, L., Yu, D. G. & Bligh, S. W. A. A review on electrospun poly(amino acid) nanofibers and their applications of hemostasis and wound healing. Biomolecules 12, 794 (2022).

Article CAS Google Scholar

Fahimirad, S. & Ajalloueian, F. Naturally-derived electrospun wound dressings for target delivery of bio-active agents. Int. J. Pharm. 566, 307–328 (2019).

Article CAS Google Scholar

Ponrasu, T., Chen, B.-H., Chou, T.-H., Wu, J.-J. & Cheng, Y.-S. Fast dissolving electrospun nanofibers fabricated from jelly fig polysaccharide/pullulan for drug delivery applications. Polymers (Basel) 13, 1–17 (2021).

Article Google Scholar

Bailore, N. N., Balladka, S. K., Doddapaneni, S. J. D. S. & Mudiyaru, M. S. Fabrication of environmentally compatible biopolymer films of pullulan/piscean collagen/ZnO nanocomposite and their antifungal activity. J. Polym. Environ. 29, 1192–1201 (2021).

Article CAS Google Scholar

Singh, R. S., Saini, G. K. & Kennedy, J. F. Pullulan: Microbial sources, production and applications. Carbohydr. Polym. 73, 515–531 (2008).

Article CAS Google Scholar

Celebioglu, H. U. et al. Mucin- and carbohydrate-stimulated adhesion and subproteome changes of the probiotic bacterium Lactobacillus acidophilus NCFM. J. Proteom. 163, 102–110 (2017).

Article CAS Google Scholar

Irwin, R. Imagining the postantibiotic future: The visual culture of a global health threat. Med. Hum. 48, 1–10. https://doi.org/10.1136/medhum-2020-011884 (2020).

Article Google Scholar

Wang, S. et al. Encapsulation of amoxicillin within laponite-doped poly(lactic-co-glycolic acid) nanofibers: Preparation, characterization, and antibacterial activity. ACS Appl. Mater. Interfaces 4, 6393. https://doi.org/10.1021/am302130b (2012).

Article CAS Google Scholar

Lasaro, M. et al. Escherichia coli isolate for studying colonization of the mouse intestine and its application to two-component signaling knockouts. J. Bacteriol. https://doi.org/10.1128/JB.01296-13 (2014).

Article Google Scholar

Poulsen, L. K., Licht, T. R., Rang, C., Krogfelt, K. A. & Molin, S. Physiological state of Escherichia coli BJ4 growing in the large intestines of streptomycin-treated mice. J. Bacteriol. 177, 5840–5845 (1995).

Article CAS Google Scholar

Nevola, J. J., Stocker, B. A. D., Laux, D. C. & Cohen, P. S. Colonization of the mouse intestine by an avirulent Salmonella typhimurium strain and its lipopolysaccharide defective mutants. Infect. Immun. 50, 152–159 (1985).

Article CAS Google Scholar

Sohrabi, A., Shaibani, P. M., Etayash, H., Kaur, K. & Thundat, T. Sustained drug release and antibacterial activity of ampicillin incorporated poly (methyl methacrylate) e nylon6 core/shell nano fibers. Polymer (Guildf.) 54, 2699–2705 (2013).

Article CAS Google Scholar

Vila, M. M. D. C., Tardelli, E. R., Chaud, M. V., Tubino, M. & Balcão, V. M. Development of a buccal mucoadhesive film for fast dissolution: Mathematical rationale, production and physicochemical characterization. Drug Deliv. 21, 530–539 (2014).

Article CAS Google Scholar

Qin, Z. Y., Jia, X. W., Liu, Q., Kong, B. H. & Wang, H. Fast dissolving oral films for drug delivery prepared from chitosan/pullulan electrospinning nanofibers. Int. J. Biol. Macromol. 137, 224–231 (2019).

Article CAS Google Scholar

Román, J. T. et al. Pullulan nanofibers containing the antimicrobial palindromic peptide LfcinB (21–25)Pal obtained: Via electrospinning. RSC Adv. 9, 20432–20438 (2019).

Article ADS Google Scholar

Leng, Y. et al. Effects of acute intra-abdominal hypertension on multiple intestinal barrier functions in rats. Nat. Publ. Gr. https://doi.org/10.1038/srep22814 (2016).

Article Google Scholar

Gerritsen, J. et al. Genomic and functional analysis of Romboutsia ilealis CRIB T reveals adaptation to the small intestine. PeerJ. https://doi.org/10.7717/peerj.3698 (2017).

Article Google Scholar

Spears, J. K., Karr-Lilienthal, L. K. & Fahey, G. C. Influence of supplemental high molecular weight pullulan or γ-cyclodextrin on ileal and total tract nutrient digestibility, fecal characteristics, and microbial populations in the dog. Arch. Anim. Nutr. 59, 257–270 (2005).

Article CAS Google Scholar

Hudzicki, J. Kirby-Bauer Disk Diffusion Susceptibility Test Protocol 1–23 (American Society for Microbiology, 2016).

Google Scholar

Laursen, M. F. et al. Infant gut microbiota development is driven by transition to family foods independent of maternal obesity. mSphere 1, e00069 (2016).

Article CAS Google Scholar

Bokulich, N. A. et al. Optimizing taxonomic classification of marker-gene amplicon sequences with QIIME 2's q2-feature-classifier plugin. Microbiome 6, 1–17 (2018).

Article Google Scholar

Callahan, B. J. et al. DADA2: High-resolution sample inference from Illumina amplicon data. Nat. Methods 13, 581–583 (2016).

Article CAS Google Scholar

Foster, Z. S. L., Sharpton, T. J. & Grünwald, N. J. Metacoder: An R package for visualization and manipulation of community taxonomic diversity data. PLoS Comput. Biol. 13, e1005404 (2017).

Article ADS Google Scholar

Download references

This research was funded by the Novo Nordisk Foundation (NNF17OC0026910), MIMIO–Microstructures, microbiota and oral delivery and by the Danish National Research Foundation (DNRF122) and Villum Foundation (Grant No. 9301), Center for Intelligent Drug Delivery and Sensing Using Microcontainers and Nanomechanics (IDUN). The authors gratefully acknowledge the animal caretakers from DTU BioF for handling the animals.

These authors contributed equally: Priscila R. Guerra and Fatemeh Ajalloueian.

National Food Institute, Technical University of Denmark, 2800, Kgs. Lyngby, Denmark

Priscila R. Guerra, Shaodong Wei, Katja Ann Kristensen, Martin Iain Bahl & Tine Rask Licht

Department of Health Technology, Technical University of Denmark, 2800, Kgs. Lyngby, Denmark

Fatemeh Ajalloueian & Anja Boisen

You can also search for this author in PubMed Google Scholar

P.R.G. and F.A. contributed to the study design, nanofibers preparation, in vivo study, data analysis, and manuscript preparation. K.A.K. contributed to the in vivo study, ELISA, and sequencing preparation. S.W. contributed to the data analysis, and manuscript preparation. M.I.B., A.B., and T.R.L. contributed to the study design, data analysis, and manuscript preparation. All authors reviewed and approved the manuscript.

Correspondence to Tine Rask Licht.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Guerra, P.R., Ajalloueian, F., Wei, S. et al. Delivery of streptomycin to the rat colon by use of electrospun nanofibers. Sci Rep 12, 21503 (2022). https://doi.org/10.1038/s41598-022-25769-z

Download citation

Received: 18 August 2022

Accepted: 05 December 2022

Published: 13 December 2022

DOI: https://doi.org/10.1038/s41598-022-25769-z

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.